Step1 : Add extension in freePBX.
2018年11月20日 星期二
How to configurate ALLWIN Tech VoIP device as an extension in trixbox(freePBX)?
Here are steps to use ALLWIN Tech VoIP device as an extension in trixbox (free PBX).
Step1 : Add extension in freePBX.
Step1 : Add extension in freePBX.
How to configurate ALLWIN Tech VoIP device as an trunk in Trixbox(freePBX)?
here is a basic configuration of ALLWIN gateway with Trixbox.
click the link below:
http:www.allwin.com.tw/pdf/trixbox_allwin.pdf
click the link below:
http:www.allwin.com.tw/pdf/trixbox_allwin.pdf
How to get in Web UI of ALLWIN tech device?
The ALLWIN VoIP router provide user friendly Web interface to let you configure your router function
The default setting of DHCP Server inside VoIP Router is turn ON, So please set up your PC TCP/IP network as "Get IP Automatically" from DHCP to get internal IP from G3000C. By default, The Router will become the network gateway and default IP is 192.168.22.1 and will assign your PC IP as 192.168.22.X.
Please go to "Control Panel"→"Network". In the "Configure" page, choose the TCP/IP of LAN card, and press "Properties" please choose "Obtain IP Address Automatically".
Launch your browser and open the VoIP Router Internal UI WAP page as http://192.168.22.1
then you have to enter the Username and password.
The default setting of DHCP Server inside VoIP Router is turn ON, So please set up your PC TCP/IP network as "Get IP Automatically" from DHCP to get internal IP from G3000C. By default, The Router will become the network gateway and default IP is 192.168.22.1 and will assign your PC IP as 192.168.22.X.
Please go to "Control Panel"→"Network". In the "Configure" page, choose the TCP/IP of LAN card, and press "Properties" please choose "Obtain IP Address Automatically".
Launch your browser and open the VoIP Router Internal UI WAP page as http://192.168.22.1
then you have to enter the Username and password.
What's the meaning of Port Status of GW?
Port Status display the current and last time of VoIP call status & result, and can be renewed the status by the "Reload" function, but all the record will be deleted if reboot the device.
Port : Display which port is on connection status, e.g. 1 or 2.
Display name: Display the remote party name of this VoIP call.
Status: Current status of this port.
Idle: Standby for making a phone call.
Signal: Waiting for DTMF press or VoIP protocol connecting.
In: There is a phone call made from phone port and call out to Network by VoIP.
Out: There is a phone call made from Network VoIP and pick up by phone set.
Connected IP: The remote party's IP of this VoIP call.
Caller ID: Caller ID received from telephone line port.
Start time: Date & Time of this VoIP begins to make a call on this port, the time is calculated from the phone rings.
Port : Display which port is on connection status, e.g. 1 or 2.
Display name: Display the remote party name of this VoIP call.
Status: Current status of this port.
Idle: Standby for making a phone call.
Signal: Waiting for DTMF press or VoIP protocol connecting.
In: There is a phone call made from phone port and call out to Network by VoIP.
Out: There is a phone call made from Network VoIP and pick up by phone set.
Connected IP: The remote party's IP of this VoIP call.
Caller ID: Caller ID received from telephone line port.
Start time: Date & Time of this VoIP begins to make a call on this port, the time is calculated from the phone rings.
What's the application of Authorization of Routing Setup / VoIP Call in / ?
When this gateway has been used for outbound call, it can be enabled to check the remote caller gateway's IP to decide to accept or refuse the call. If define the IP range here and enable the "Auth" option on the / VoIP Setup / Routing Setup / VoIP Call in /, only the IP in range will be allowed to call out by this gateway.
What's the application for "Forward" of Router Setup / VoIP Call in?
Define each item on Forwarding below.
Name: Specify a profile name. Please use UNDERLINE to instead of SPACE due to the HTTP protocol limitation.
Always: Always redirect forward to this IP(or URL) / Phone number, all incoming call will be forwarded to the assigned IP here.
On Busy: Redirect forward to this IP(or URL)/Phone number when busy, all incoming VoIP call will be forwarded to the assigned IP here when this line is busy.
No Answer:Redirect forward to this IP(or URL)/Phone number when no answer over the time No Answer Sec, an incoming VoIP call will be forwarded to the assigned IP here when ring time over the defined No Answer Sec.
Below is the Configuration method for users want to forward the call to the IP of 172.16.39.2 for calling to 66390001 directly, please also revise the call number to 63986399.
Configuration on VoIP Call in below:
Forwarding:
Name: Specify a profile name. Please use UNDERLINE to instead of SPACE due to the HTTP protocol limitation.
Always: Always redirect forward to this IP(or URL) / Phone number, all incoming call will be forwarded to the assigned IP here.
On Busy: Redirect forward to this IP(or URL)/Phone number when busy, all incoming VoIP call will be forwarded to the assigned IP here when this line is busy.
No Answer:Redirect forward to this IP(or URL)/Phone number when no answer over the time No Answer Sec, an incoming VoIP call will be forwarded to the assigned IP here when ring time over the defined No Answer Sec.
Below is the Configuration method for users want to forward the call to the IP of 172.16.39.2 for calling to 66390001 directly, please also revise the call number to 63986399.
Configuration on VoIP Call in below:
Forwarding:
What's the application for "Prefix" of Router Setup / VoIP Call Out?
The prefix number will be added on the users' press number, e.g. if users press the number is "567" and the prefix field is set to "123", then the actual call out number will be "123567"; if the prefix field is set to "@123", then the actual call out number will be "567123".
How to restore all of your configuration parameters on the VoIP Router?
Please click the "Browse" button of System Setup / Backup / Restore / Configurations / of Web UI to select the back configuration parameters file, then click "Restore" button to upload it; after that, please click "Reboot" of System Setup / Backup / Restore / Configurations / Reboot System / for completing the Restore function.
Please note: In order not to save the old date, please don't execute the action of "Save".
Please note: In order not to save the old date, please don't execute the action of "Save".
What's the different application between Virtual Server and Port Mapping of System Setup/NAT on G300C series and G3000C series?
Virtual Server can be assigned to one of LANs' IP and port mapping to one of port of WANs' IP(such as below diagram that LAN IP 192.168.22.123 of port 5689 mapping to WAN IP's port 5689).
Port Mapping can be assigned to one of LANs' IP mapping to one of port or multiple ports of WANs' IP. As below diagram, Mapping Ports Mapping Ports can be used " - " or " , " to separate the multiple ports.
Port Mapping can be assigned to one of LANs' IP mapping to one of port or multiple ports of WANs' IP. As below diagram, Mapping Ports Mapping Ports can be used " - " or " , " to separate the multiple ports.
Define the prefix number on Area Code of VoIP Call out, any phone number prefix digits matched with the rule will call out by this rule's definition.
hl: represents Hot-Line, the port number would be added behind hl, such as if the call made through port 3 that would be filled in as hl3, and so on.
hl1: configured port 1 for Hot-Line, and so on.
(Please choose "Enable" on Line Setting / Hotline / for above two setting).
v: if the call route to default Server is disable, then the call will route to PSTN line by this rule.
v0: if the call route to default Server with the beginning number of 0 is disable, then the call will route to PSTN line by this rule, and so on.
p: if the call out via the assigned PSTN line is disable, then the call out will route to the assigned Sever by this rule, and so on.
p1: if the call route via PSTN with the beginning number of 1, then the call out will route to the assigned Server, and so on.
(These above four prefix code should be combined with the setting in pstn / rs of the Destination column used for G3000C series and G111b only right now).
hl1: configured port 1 for Hot-Line, and so on.
(Please choose "Enable" on Line Setting / Hotline / for above two setting).
v: if the call route to default Server is disable, then the call will route to PSTN line by this rule.
v0: if the call route to default Server with the beginning number of 0 is disable, then the call will route to PSTN line by this rule, and so on.
p: if the call out via the assigned PSTN line is disable, then the call out will route to the assigned Sever by this rule, and so on.
p1: if the call route via PSTN with the beginning number of 1, then the call out will route to the assigned Server, and so on.
(These above four prefix code should be combined with the setting in pstn / rs of the Destination column used for G3000C series and G111b only right now).
How to define the "Destination" IP on VoIP Call Out of G300C/G3000C series for calling out number? Users can input below format to fit these rules?
rs: represents Register Server, can make phone call out automatically by register to Server successfully, the number order is 1_2_3_4.
rs1: represents to route the call via Register Server of number 1, rs2 represents to route the call via Register Sever of number 2, and so on.
rs1_3: represents the priority of routing the call is via rs1; if the Server registered of number 1 is failed that will route the call via rs3, and so on.
Pstn: represents to route the call via PSTN line interface of the device applied to G3000C series, G111b and other VoIP devices's spec. including PSTN port.
sip:ip:UDP: represents the call communication is via peer to peer of SIP protocol, UDP represents the Listen port of receiver.
h323:ip:UDP: represents the call communication via peer to peer of H.323 protocol, UDP represents the Listen port of receiver.
Ipivr: Enter the Network parameter voice interactive setting mode. Users can us this function to enter all the WAN network parameters without PC. (Please refer to the application note "IP IVR procedure" on User's Manual for more detail).
Rect: Enter to voice record procedure. Users can assign a function code for enter the voice record procedure, when press this code to enter the voice record procedure, the device will record 30 seconds voice file and keep on sound wave file (G.711, uLaw), Users can download the recorded wave file on / VoIP Setup / Advance setting / Prompt Voice / and use this file to upload for customization voice or use for busy tone analysis.
lo: assign the route to local loop back. The destination IP of this call will be the local host, i.e.: 127.0.0.1.
The space also can be configured IP address or Domain Name for communication of peer to peer, also assigned the communication port later.
rs1: represents to route the call via Register Server of number 1, rs2 represents to route the call via Register Sever of number 2, and so on.
rs1_3: represents the priority of routing the call is via rs1; if the Server registered of number 1 is failed that will route the call via rs3, and so on.
Pstn: represents to route the call via PSTN line interface of the device applied to G3000C series, G111b and other VoIP devices's spec. including PSTN port.
sip:ip:UDP: represents the call communication is via peer to peer of SIP protocol, UDP represents the Listen port of receiver.
h323:ip:UDP: represents the call communication via peer to peer of H.323 protocol, UDP represents the Listen port of receiver.
Ipivr: Enter the Network parameter voice interactive setting mode. Users can us this function to enter all the WAN network parameters without PC. (Please refer to the application note "IP IVR procedure" on User's Manual for more detail).
Rect: Enter to voice record procedure. Users can assign a function code for enter the voice record procedure, when press this code to enter the voice record procedure, the device will record 30 seconds voice file and keep on sound wave file (G.711, uLaw), Users can download the recorded wave file on / VoIP Setup / Advance setting / Prompt Voice / and use this file to upload for customization voice or use for busy tone analysis.
lo: assign the route to local loop back. The destination IP of this call will be the local host, i.e.: 127.0.0.1.
The space also can be configured IP address or Domain Name for communication of peer to peer, also assigned the communication port later.
How to delete the IVR of "lease dial telephone number" when peer A call to peer B through IP?
Please cancel the check box of "rompt Voice"of VoIP Setup / Advance Setup / Promot Voice / for VoIP call in.
How to let Caller ID via PSTN call in (FXO interface) register to Sever when G300C series register to Server?
The space of Line Setting / Line Number / should be left blank, and choose "Register Number" on Line Feature / When VoIP call out / Send ANI by /, then Caller ID will be display on Display name of Port Status.
Description on the connection of G3000C's interface.
The G3000C VoIP Router includes FXS and PSTN interface; the Pin 2 and Pin 3 of telephone interface connected to PSTN line, and the Pin 1 and Pin 4 connected to pots phone or PBX CO line.
What's FXS & FXO? Is there any application and limitation on the interface?
FXS:
An FXS interface provides -48 VDC power and generates ring signals, connects to standard analog telephones or PBX central office line normally.
FXO:
An FXO interface receives -48 VDC power and receives ring signals, connects to PSTN line or PBX extension normally.
FXS interface can not be connected to another FXS interface, and must not be connected to PSTN line or PBX extension,
Otherwise it will cause devices damaged; FXS just can be connected to digital PBX central office line.
An FXS interface provides -48 VDC power and generates ring signals, connects to standard analog telephones or PBX central office line normally.
FXO:
An FXO interface receives -48 VDC power and receives ring signals, connects to PSTN line or PBX extension normally.
FXS interface can not be connected to another FXS interface, and must not be connected to PSTN line or PBX extension,
Otherwise it will cause devices damaged; FXS just can be connected to digital PBX central office line.
How to solve the problem of no any dial tone when pick up the phone for FXS interface of GW?
1. Please make sure if the power of GW is on.
2. Please check if the indicator of front panel is on when pick up the phone.
3. Please also check if the check box is cancelled on the "Prompt voice for replace dial tone" of Voip Setup / Advance Setup / Prompt Voice of Web UI.
4. Please return the device to Allwin for inspection if the above step 1 to step 3 are all correct.
2. Please check if the indicator of front panel is on when pick up the phone.
3. Please also check if the check box is cancelled on the "Prompt voice for replace dial tone" of Voip Setup / Advance Setup / Prompt Voice of Web UI.
4. Please return the device to Allwin for inspection if the above step 1 to step 3 are all correct.
How to delete the IVR "of please dial telephone number" on the pots phone which connected to FXS interface of VoIP Router, or call in FXO interface of VoIP Router through PSTN?
Please cancel the check box of "Prompt voice for replace dial tone" of VoIP Setup / Advance Setup / Prompt Voice of Web UI
How is the connection method of G536 trunk GW?
LAN 1 is connected to the computer, LAN 2 is connected to Internet real IP
How to recognize whether VoIP Router is connected to GK/SIP Proxy Server normally?
If the device's indicator of "Ready" is green always, that is the device connected to GK/SIP Server normally; if the indicator of "Ready" is flash or off, that is the device connected to GK/SIP Proxy Server abnormally.
What kind of CODEC is applied to ALLWIN's VoIP GW?
ALLWIN's VoIP GW supports the following CODEC simultaneously.
-G.711 A-law / u-law (64kbps)
-G.723.1 (5.3 or 6.3kbps)
-G.726 (ADPCM 40, 32, 24, 16 kbps)
-G.729a/G.729b (8kbps)
-G.711 A-law / u-law (64kbps)
-G.723.1 (5.3 or 6.3kbps)
-G.726 (ADPCM 40, 32, 24, 16 kbps)
-G.729a/G.729b (8kbps)
What kind of protocol is applied to ALLWIN's VoIP GW?
ALLWIN's VoIP GW supports H.323&SIP simultaneously
Is there any limitation on using phone sets for correcting to FXS interface of GW regarding FXS interface of ALLWIN's VoIP GW?
No, there is no any limitation on it, just connect the standard analog telephones (pots phone) to FXS interfaces of GWs.
How to access the Web UI interface of VoIP devices?
First, please open your IE browser and key in the factory default IP address of http://192.168.22.1 in the URL bar.
After that, please key in the default user name of voip, default password of 1234, then you will be taken to the Web UI when you have successfully logged in as the administrator.
After that, please key in the default user name of voip, default password of 1234, then you will be taken to the Web UI when you have successfully logged in as the administrator.
ALLWIN Tech Auto Provision System
The Provision Server can manage the different parameter of devices, therefore store all the configuration and Firmware of devices' into the central Provision Server that the remote devices can download the newest configuration and Firmware from Provision Server regularly or when start the devices.
As a result, the users can make the central management and solve the problem efficiently if users cannot access the internal IP of remote devices by Provision Server.
Description of spec. funtion below:
A:List a table ahead and upload it once.
The administrator can collect all the mutual parameter contents into a compression file of Parameter Model ahead and upload it to Provision Server (PR), then upload the different parameter contents of individual CPE by text file which is compatible with edition tool of Excel CSV and users can edit the contents on line directly.
When users start the device and would like to get configuration file from PR, PR will compare its IP and MAC(can be assigned individually or compared at the same time), if they meet one of table's list that PR will combine the mutual parameter file of corresponding Parameter Model and the contents of upload individual parameter, then send it to CPE after encryption.
B: The authorization after installation.
The CPE's device are not listed on the above CSV file ahead but ask for the automatic Provision Parameter from PR after installation. In the meantime, PR will quarantine the device into Queue Client for waiting authorization and not response any parameter temporarily till the system administrator check the Mac, IP from PR and other information are corresponding, then tick the suitable mutual parameter file of Parameter Model, after that, the client's device can get the basic parameter automatically.
After users get the basic parameter, the administrator can access the PR to configure the device individually or configure it once by execution of Macro.
C:Modify instruction after installation.
After the installation of clients' devices, if users want to modify the parameter for partial or all devices once that users can define them into a Macro, then choose the range of the modified devices to execute the Macro for the modification of many devices once.
D:Update Firmware.
Update the Firmware of the clients' device that users can choose the different version individually or update it for partial or all devices as well as to review the use status of the internal software server of the device.
E:Set up the position list of automatic renew Server.
System can setup an address list including at least 5 provision servers. When there is any change in this list, as long as the client device connects to any provision server of the list, the newest address list will be updated.
F:Upload the parameter model.
The system administrator can combine common parameters such as call-out routing table into a common parameter model for setting VoIP devices of client side more efficient.
This parameter model will be the base of new setting and it also can be uploaded to system.
G:The management of firmware version.
The PR can upload and download the different version's firmware of different devices for the use of future automatic update.
H:Upload the data for reserved users.
The PR can upload the different parameter contents table by CSV file which is compatible with Excel file by edit tool of Excel CSV, the upload data will be listed clearly for correction and reference.
If there is any MAC and IP of devices corresponding to the table list to ask for the automatic Provision that the table's parameter content will be used.
I:Edit the data for reserved users.
If wants to make an inquiry, the browsing, the edition or the revision on the parameter data for individual client's device that can use IE browser, MAC or IP to find out the device and list the parameter contents.
J:Unauthorized VoIP devices will stack to the pending list.
The Provision Server will ignore the request when VoIP devices ask for parameter contents from PR that is not on the pre-arranging MAC of the parameter table, but store the device into the list and display its model name, IP, MAC, time for the first request and last connection.
K:List the built devices.
The PR system can list the built devices in detail including if the device is on the line, model name, WAN IP, MAC, time for the first request and last connection.
L:Build an edit Macro.
When partial or all parameters of different device in client side need to be edit or fixed, administrator can make a new macro file which including new parameters edit on web UI, and this macro also load to any device which is selected by administrator.
As a result, the users can make the central management and solve the problem efficiently if users cannot access the internal IP of remote devices by Provision Server.
Description of spec. funtion below:
A:List a table ahead and upload it once.
The administrator can collect all the mutual parameter contents into a compression file of Parameter Model ahead and upload it to Provision Server (PR), then upload the different parameter contents of individual CPE by text file which is compatible with edition tool of Excel CSV and users can edit the contents on line directly.
When users start the device and would like to get configuration file from PR, PR will compare its IP and MAC(can be assigned individually or compared at the same time), if they meet one of table's list that PR will combine the mutual parameter file of corresponding Parameter Model and the contents of upload individual parameter, then send it to CPE after encryption.
B: The authorization after installation.
The CPE's device are not listed on the above CSV file ahead but ask for the automatic Provision Parameter from PR after installation. In the meantime, PR will quarantine the device into Queue Client for waiting authorization and not response any parameter temporarily till the system administrator check the Mac, IP from PR and other information are corresponding, then tick the suitable mutual parameter file of Parameter Model, after that, the client's device can get the basic parameter automatically.
After users get the basic parameter, the administrator can access the PR to configure the device individually or configure it once by execution of Macro.
C:Modify instruction after installation.
After the installation of clients' devices, if users want to modify the parameter for partial or all devices once that users can define them into a Macro, then choose the range of the modified devices to execute the Macro for the modification of many devices once.
D:Update Firmware.
Update the Firmware of the clients' device that users can choose the different version individually or update it for partial or all devices as well as to review the use status of the internal software server of the device.
E:Set up the position list of automatic renew Server.
System can setup an address list including at least 5 provision servers. When there is any change in this list, as long as the client device connects to any provision server of the list, the newest address list will be updated.
F:Upload the parameter model.
The system administrator can combine common parameters such as call-out routing table into a common parameter model for setting VoIP devices of client side more efficient.
This parameter model will be the base of new setting and it also can be uploaded to system.
G:The management of firmware version.
The PR can upload and download the different version's firmware of different devices for the use of future automatic update.
H:Upload the data for reserved users.
The PR can upload the different parameter contents table by CSV file which is compatible with Excel file by edit tool of Excel CSV, the upload data will be listed clearly for correction and reference.
If there is any MAC and IP of devices corresponding to the table list to ask for the automatic Provision that the table's parameter content will be used.
I:Edit the data for reserved users.
If wants to make an inquiry, the browsing, the edition or the revision on the parameter data for individual client's device that can use IE browser, MAC or IP to find out the device and list the parameter contents.
J:Unauthorized VoIP devices will stack to the pending list.
The Provision Server will ignore the request when VoIP devices ask for parameter contents from PR that is not on the pre-arranging MAC of the parameter table, but store the device into the list and display its model name, IP, MAC, time for the first request and last connection.
K:List the built devices.
The PR system can list the built devices in detail including if the device is on the line, model name, WAN IP, MAC, time for the first request and last connection.
L:Build an edit Macro.
When partial or all parameters of different device in client side need to be edit or fixed, administrator can make a new macro file which including new parameters edit on web UI, and this macro also load to any device which is selected by administrator.
ODM / OEM are Welcome
ALLWIN has focused on the application and products of internet communication for many years. The key technologies and systems of Hardware/Software we provide have the leading competitiveness no matter in features or in pricing as our strong R&D team with rich experiences.
We have also built good business relationships with all of our vendors and customers, therefore we can provide the OEM/ODM service to our customers by the vertical and horizontal integration.
Furthermore, we have also designed specific communication card and special-purpose model for our customers before, therefore you are very welcome to inquire OEM/ODM project and service with us in order to meet your market's soonest demand.
Again, our goal is to carry on developing customers' satisfied products to meet market's demand and build win-win business relationship with our customers.
We have also built good business relationships with all of our vendors and customers, therefore we can provide the OEM/ODM service to our customers by the vertical and horizontal integration.
Furthermore, we have also designed specific communication card and special-purpose model for our customers before, therefore you are very welcome to inquire OEM/ODM project and service with us in order to meet your market's soonest demand.
Again, our goal is to carry on developing customers' satisfied products to meet market's demand and build win-win business relationship with our customers.
Support configuration of IVR.
The configuration of WAN IP can be programmed by IVR to setup the necessary parameter of IP via DTMF code of phone sets that users don't need to use the computer for the device's configuration for all of ALLWIN's products.
IP IVR funtion and more information.IVR User Manual
IP IVR funtion and more information.IVR User Manual
No need to restart devices when new configuration has modified.
Most of the configuration modification on Web UI becomes effective immediately without re-starting the computer for all of ALLWIN's products.
Also, the devices can work normally in 30 seconds after turning on the power, and build-in the watching dog to monitor if the devices can work normally and re-start the devices automatically when they shut down.
As the special design of watching dog to assure the device are used efficiently all the time.
Also, the devices can work normally in 30 seconds after turning on the power, and build-in the watching dog to monitor if the devices can work normally and re-start the devices automatically when they shut down.
As the special design of watching dog to assure the device are used efficiently all the time.
Users can upload various customized prompt voice.
All of ALLWIN's products can advise users the current devices' status by customized prompt voice, these customized prompt voice can be made by telephone's record or upload the voice file of G.711 and G.723 format through Web UI.
Support call detailed record export to external CDR server.
All of ALLWIN's VoIP devices can export all of the call detailed record to two external Web servers via HTTP protocol to generate CDR.
Users can limit the call in IP.
Users can configure to accept specific IP range for VoIP call in to avoid the useless call in or illegal use.
All of ALLWIN's products can be configured many sets of IP range, only the authorized IP can be called in when the other VoIP devices call in, this kind of function can avoid the useless call in and illegal use on Internet.
All of ALLWIN's products can be configured many sets of IP range, only the authorized IP can be called in when the other VoIP devices call in, this kind of function can avoid the useless call in and illegal use on Internet.
Support various application of "Forward".
Users can configure the call forward of always/on busy/no answer via ALLWIN's VoIP devices, all of the above functions can be configured by all calls are forwarded to the same receiver or assigned different receiver with different line.
All of ALLWIN's product lines support Auto Provision System, easy to be built and managed.
In order to manage many kinds of VoIP devices efficiently, all of ALLWIN's products can be maintained by the specific Auto Provision Server.
Therefore the provision server can make the central management and solve the problem efficiently if it cannot access the internal IP of remote devices.
GW will synchronize to Provision Server for confirming firmware version when it restarts every time,
also check if there is any newest version or configuration can be downloaded every 60 minutes (user can define the period of synchronization) . Synchronization will be executed at night time even there is no newest data from Provision Server to assure the data is all correct.
Easy to understand but powerful table for Call Out and Call In route.
The application is quite easy and flexible that users can configure over 100 sets of Call Out and Call In routing rules, besides setting the number length according to different area code, but also can increase or decrease the numbers, choose different route, transfer and protocol, route the call via peer to peer or Proxy Server.
Users can review every status information and tool via Web GUI...
Users can review every status information and tool via Web GUI and control the use status real time that is efficient to help installation maintenance and debug bugs.
Users can review every kind of information below through Web GUI of ALLWIN's VoIP devices.
1) The connecting route, Caller ID, Time, Call out number, off-line reason and so on for every call.
2) Enable and disable status with reasons for registering to every server.
3) Information of Calling package statistics in each line (port).
4) Status for connecting to multiple Auto Provision Server.
5) Execute ping test from CPE for remote internet connecting quality.
Users can review every kind of information below through Web GUI of ALLWIN's VoIP devices.
1) The connecting route, Caller ID, Time, Call out number, off-line reason and so on for every call.
2) Enable and disable status with reasons for registering to every server.
3) Information of Calling package statistics in each line (port).
4) Status for connecting to multiple Auto Provision Server.
5) Execute ping test from CPE for remote internet connecting quality.
Register up to 4 SIP Proxy or GKs simultaneously, and may the multiple...
Register up to 4 SIP Proxy or GKs simultaneously, and may the multiple ports altogether use an account number or various ports individual use different account number for registration on the same evice. It's the most easy and safe way applied to back-up route or different route at the same time.
All of ALLWIN's product lines can regsiter up to 4 SIP Proxy or GKs simultaneously.
As below diagram, the area code number of 020 will make redundancy according to the orders of 2>3>1 by 3 SIP server.
All of ALLWIN's product lines can regsiter up to 4 SIP Proxy or GKs simultaneously.
As below diagram, the area code number of 020 will make redundancy according to the orders of 2>3>1 by 3 SIP server.
Support H.323 and SIP protocol simultaneously, old and new protocol can be compatible highly.
Build-in powerful Router functions.
As the CODEC is processed by the specific DSP for all of ALLWIN's product lines, therefore the build-in 32 bit network processor has enough ability to process the internet router functions besides the VoIP functions, these powerful functions include:
WAN connection
Besides support DHCP client. Static IP, PPPoE for accessing network, but also support PPPTP, L2TP, MAC Cloning and so on.
NAT
Besides support basic NAT and DHCP Server, but also support Virtual Server, Special Application mapping, Port mapping, ALG, DMZ and Static Routing table and so on.
Firewall
Provide many kinds of Firewall's configurations to prevent from the Internet malicious attack, and may aim at different Port to provide Client filtering, URL Filtering, MAC control and so on for filtering control.
UPNP
Support the UPNP protocol and can display the use of Port mapping.
DDNS
Build-in Dynamic Domain Name Service supporting various services, such as dyndns.org. and so on that can be applied to no fixed Static IP environment.
WAN connection
Besides support DHCP client. Static IP, PPPoE for accessing network, but also support PPPTP, L2TP, MAC Cloning and so on.
NAT
Besides support basic NAT and DHCP Server, but also support Virtual Server, Special Application mapping, Port mapping, ALG, DMZ and Static Routing table and so on.
Firewall
Provide many kinds of Firewall's configurations to prevent from the Internet malicious attack, and may aim at different Port to provide Client filtering, URL Filtering, MAC control and so on for filtering control.
UPNP
Support the UPNP protocol and can display the use of Port mapping.
DDNS
Build-in Dynamic Domain Name Service supporting various services, such as dyndns.org. and so on that can be applied to no fixed Static IP environment.
Use OneInXML parser Engine which function is flexible and performance is stabile
Generally, the construction of software from bottom tier to top tier is RTOS (Real Time Operation System)>SIP protocol>application>WEB UI for other VoIP devices' suppliers and their every tier of software is compiled by C language with API.
Therefore, the system would shut down if any tier of software is on trouble by this kind of traditional design; and any modification need to be re-compiled, then link for use. If not consider the inside process from bottom to top tiers of API's for the modification of any tier of software that it will cause the system shut down as well. Hence, the traditional design by C language and API oriented will be difficult to meet the application of customized VoIP devices.
As ALLWIN understands the design way and its limitation, ALLWIN's R&D team spent around USD0.35 million and two years to design the newest construction of SW and HW after getting the R&D project's sponsor of "Ministry of Economic Affairs, R.O.C.".
The project of OneInXML uses specific XML parser to process the high lever's application of top tier of SW, such as CODEC procedure and Web UI.
Therefore, ALLWIN can meet and provide OEM/ODM service due to the separate process of application's tier and protocol's tier to assure the stability and easy to extend the application of devices.
Therefore, the system would shut down if any tier of software is on trouble by this kind of traditional design; and any modification need to be re-compiled, then link for use. If not consider the inside process from bottom to top tiers of API's for the modification of any tier of software that it will cause the system shut down as well. Hence, the traditional design by C language and API oriented will be difficult to meet the application of customized VoIP devices.
As ALLWIN understands the design way and its limitation, ALLWIN's R&D team spent around USD0.35 million and two years to design the newest construction of SW and HW after getting the R&D project's sponsor of "Ministry of Economic Affairs, R.O.C.".
The project of OneInXML uses specific XML parser to process the high lever's application of top tier of SW, such as CODEC procedure and Web UI.
Therefore, ALLWIN can meet and provide OEM/ODM service due to the separate process of application's tier and protocol's tier to assure the stability and easy to extend the application of devices.
ALLWIN provides the standard, friendly and functional users' Web UI
ALLWIN designs all of product lines by many years of rich design experiences, no matter on the design of hardware, communication protocol, or Web UI; and not only to accept the "Me too" products of chip vendor's turn key.
Also, ALLWIN provides the standard Web UI on IP phones, various ports of Gateways, E1 PRI trunk; therefore it's easier for clients to use all of ALLWIN's product lines after users are familiar with one of any products' Web UI.
Also, ALLWIN provides the standard Web UI on IP phones, various ports of Gateways, E1 PRI trunk; therefore it's easier for clients to use all of ALLWIN's product lines after users are familiar with one of any products' Web UI.
訂閱：
意見 (Atom)