Step1 : Add extension in freePBX.
2018年11月20日 星期二
How to configurate ALLWIN Tech VoIP device as an extension in trixbox(freePBX)?
Here are steps to use ALLWIN Tech VoIP device as an extension in trixbox (free PBX).
Step1 : Add extension in freePBX.
Step1 : Add extension in freePBX.
How to configurate ALLWIN Tech VoIP device as an trunk in Trixbox(freePBX)?
here is a basic configuration of ALLWIN gateway with Trixbox.
click the link below:
http:www.allwin.com.tw/pdf/trixbox_allwin.pdf
click the link below:
http:www.allwin.com.tw/pdf/trixbox_allwin.pdf
How to get in Web UI of ALLWIN tech device?
The ALLWIN VoIP router provide user friendly Web interface to let you configure your router function
The default setting of DHCP Server inside VoIP Router is turn ON, So please set up your PC TCP/IP network as "Get IP Automatically" from DHCP to get internal IP from G3000C. By default, The Router will become the network gateway and default IP is 192.168.22.1 and will assign your PC IP as 192.168.22.X.
Please go to "Control Panel"→"Network". In the "Configure" page, choose the TCP/IP of LAN card, and press "Properties" please choose "Obtain IP Address Automatically".
Launch your browser and open the VoIP Router Internal UI WAP page as http://192.168.22.1
then you have to enter the Username and password.
The default setting of DHCP Server inside VoIP Router is turn ON, So please set up your PC TCP/IP network as "Get IP Automatically" from DHCP to get internal IP from G3000C. By default, The Router will become the network gateway and default IP is 192.168.22.1 and will assign your PC IP as 192.168.22.X.
Please go to "Control Panel"→"Network". In the "Configure" page, choose the TCP/IP of LAN card, and press "Properties" please choose "Obtain IP Address Automatically".
Launch your browser and open the VoIP Router Internal UI WAP page as http://192.168.22.1
then you have to enter the Username and password.
What's the meaning of Port Status of GW?
Port Status display the current and last time of VoIP call status & result, and can be renewed the status by the "Reload" function, but all the record will be deleted if reboot the device.
Port : Display which port is on connection status, e.g. 1 or 2.
Display name: Display the remote party name of this VoIP call.
Status: Current status of this port.
Idle: Standby for making a phone call.
Signal: Waiting for DTMF press or VoIP protocol connecting.
In: There is a phone call made from phone port and call out to Network by VoIP.
Out: There is a phone call made from Network VoIP and pick up by phone set.
Connected IP: The remote party's IP of this VoIP call.
Caller ID: Caller ID received from telephone line port.
Start time: Date & Time of this VoIP begins to make a call on this port, the time is calculated from the phone rings.
Port : Display which port is on connection status, e.g. 1 or 2.
Display name: Display the remote party name of this VoIP call.
Status: Current status of this port.
Idle: Standby for making a phone call.
Signal: Waiting for DTMF press or VoIP protocol connecting.
In: There is a phone call made from phone port and call out to Network by VoIP.
Out: There is a phone call made from Network VoIP and pick up by phone set.
Connected IP: The remote party's IP of this VoIP call.
Caller ID: Caller ID received from telephone line port.
Start time: Date & Time of this VoIP begins to make a call on this port, the time is calculated from the phone rings.
What's the application of Authorization of Routing Setup / VoIP Call in / ?
When this gateway has been used for outbound call, it can be enabled to check the remote caller gateway's IP to decide to accept or refuse the call. If define the IP range here and enable the "Auth" option on the / VoIP Setup / Routing Setup / VoIP Call in /, only the IP in range will be allowed to call out by this gateway.
What's the application for "Forward" of Router Setup / VoIP Call in?
Define each item on Forwarding below.
Name: Specify a profile name. Please use UNDERLINE to instead of SPACE due to the HTTP protocol limitation.
Always: Always redirect forward to this IP(or URL) / Phone number, all incoming call will be forwarded to the assigned IP here.
On Busy: Redirect forward to this IP(or URL)/Phone number when busy, all incoming VoIP call will be forwarded to the assigned IP here when this line is busy.
No Answer:Redirect forward to this IP(or URL)/Phone number when no answer over the time No Answer Sec, an incoming VoIP call will be forwarded to the assigned IP here when ring time over the defined No Answer Sec.
Below is the Configuration method for users want to forward the call to the IP of 172.16.39.2 for calling to 66390001 directly, please also revise the call number to 63986399.
Configuration on VoIP Call in below:
Forwarding:
Name: Specify a profile name. Please use UNDERLINE to instead of SPACE due to the HTTP protocol limitation.
Always: Always redirect forward to this IP(or URL) / Phone number, all incoming call will be forwarded to the assigned IP here.
On Busy: Redirect forward to this IP(or URL)/Phone number when busy, all incoming VoIP call will be forwarded to the assigned IP here when this line is busy.
No Answer:Redirect forward to this IP(or URL)/Phone number when no answer over the time No Answer Sec, an incoming VoIP call will be forwarded to the assigned IP here when ring time over the defined No Answer Sec.
Below is the Configuration method for users want to forward the call to the IP of 172.16.39.2 for calling to 66390001 directly, please also revise the call number to 63986399.
Configuration on VoIP Call in below:
Forwarding:
What's the application for "Prefix" of Router Setup / VoIP Call Out?
The prefix number will be added on the users' press number, e.g. if users press the number is "567" and the prefix field is set to "123", then the actual call out number will be "123567"; if the prefix field is set to "@123", then the actual call out number will be "567123".
訂閱：
意見 (Atom)